Setting The Alarm Clock - Sangean RCR-11 WF Instruction Manual

Setting the alarm clock

Your radio has two separate alarms which can be set to wake you to either the radio, USB or a
buzzer alarm. In the event of a power interruption your radio has built in memory that will retain
your alarm settings. Ensure that the time is set correctly before setting the alarms.
. Press and hold the Menu button and Press the Tuning buttons until 'Main menu' is highlighted.
Press the Select button to enter the menu.
. Press the Tuning buttons until 'Alarms' is highlighted and the press the Select button to enter
the selection.
3. Press the Tuning buttons until the desired alarm (1 or 2) is highlighted on the display. Press the
Select button to enter alarm setup.
. Press the Tuning buttons until 'Time' is highlighted on the display. Press the Select button to
adjust the alarm time.
5. Press the Tuning buttons to choose the alarm hour. Press the Select button to confirm the
setting.
6. Press the Tuning buttons to choose the alarm minute. Press the Select button to confirm the
setting. The display will then return to the alarm setting menu. If the radio has been set to use
a 12 hour clock format, there will also be an option here for setting AM or PM for the alarm time.
67