4.11 Crescendo pedal
The crescendo pedal can be used to activate 20 registrations step-by-step. These
registrations start with very quiet (pianissimo) to very loud (tutti).
The default registrations of the 20 steps can be changed. See § 5.2 Crescendo.
Activating the crescendo pedal
If the crescendo pedal is not activated it is
indicated on the display with Cr:--.
Use the CR piston to activate the crescendo
pedal. The display indicates the actual step.
Crescendo pedal as additional swell pedal
The crescendo pedal can also be configured as a swell pedal. See § 5.6 Expression
Pedals.
If the crescendo pedal is set as additional swell pedal, all functions of the
crescendo pedal are deactivated.
4.12 Quick Access
Quick Access is a function to quickly access a certain functions of the organ.
4.12.1 Programming mode crescendo pedal
This function is not available if no expression pedal is set as
crescendo pedal.
Pressing the ENTER and CR piston simultaneously enters the programming mode
of the crescendo pedal. See § 5.2 Crescendo, sub 4 for the next steps.
4.12.2 Keyboard assignment Orchestrals
Through use of Quick Access it is also possible to assign a solo- or orchestral voice
directly to a manual or the pedal.
1.
Press the ENTER piston simultaneously with a piston of a solo- or orchestral
voice, for example Panflute.
2.
The actual assignment appears on the
display.
3.
Press a key of the manual or the pedal on
which the solo- or orchestral voice has to be assigned.
4.
Now the solo- or orchestral voice is playable from the selected manual or
pedal.
User Manual Classic 250/350
Am:Center Mem: 1
Tr: 0/440
Cr:--
Am:Center Mem: 1
Tr: 0/440
Cr: 0
Panflute
Assigned: Great
19