Crescendo Pedal; Quick Access; Programming Mode Crescendo Pedal - Johannus Opus 250 User Manual

1. Press the TRANS piston.
2. Use the - and + pistons to set the pitch.
3. When the transposer change needs to be saved, press the ENTER piston in
the time the TRANS. piston is lit.

4.11 Crescendo pedal

The crescendo pedal can be used to activate 20 registrations step-by-step. These
registrations start with very quiet (pianissimo) to very loud (tutti).
The default registrations of the 20 steps can be changed. See § 5.1 Crescendo.
Activating the crescendo pedal
If the crescendo pedal is not activated it is
indicated on the displays with Cr:--.
Use the CR piston to activate the crescendo
pedal. The display indicates the actual step.
Crescendo pedal as additional swell pedal
The crescendo pedal can also be configured as a swell pedal. See § 5.5 Expression
Pedals.
If the crescendo pedal is set as additional swell pedal, all functions of the
crescendo pedal are deactivated.

4.12 Quick Access

Quick Access is a function to quickly access certain function of the organ.

4.12.1 Programming mode crescendo pedal

Pressing the ENTER and CR piston simultaneously enters the programming mode
of the crescendo pedal. See § 5.1 Crescendo, sub 4 for next steps.
User Manual Opus 250/350
This function is not available if no expression pedal is set as
crescendo pedal.
Opus 250 Mem: 1
Tr: 0/440 Cr:--
Opus 250 Mem: 1
Tr: 0/440 Cr: 0
17