Key Volumes - Johannus classic 250 User Manual

8. Repeat steps 4 to 7 to change the setting of another
manual or press the MENU piston twice to exit the
Johannus Menu.
5.8

Key Volumes

The Key Volumes function makes it possible to adjust the key volumes of each stop.
This function consists of the following sub functions:
a. Adjust
b. Reset one stop
c. Reset ALL stops
a. Adjust
The Adjust function sets the volume per key, stop and intonation style.
Key volumes of the (optional) solo- and orchestral voices cannot be
adjusted.
1. Switch off all stops.
2. Select an intonation style or variation.
3. Press the MENU piston.
Use the - and + pistons to select the Key Volumes
4.
function on the display.
5. Press the ENTER piston. The first sub function of the
Key Volumes menu appears on the display.
If you are asked to enter a code, the Key
Volumes function has been secured at the
request of the owner. Contact the owner
or dealer to retrieve the code. Enter the code using the pistons of the
capture memory locations and press the ENTER piston.
6. Press the ENTER piston. The request to select a stop to
adjust appears on the display.
7. Activate one stop. The request to press a key appears
on the display.
8. Press one key on the corresponding division and hold
the key. The display will now show Key: the key
indicator and Vol: the volume.
9. Use the - and + pistons to set the desired volume.
10. Press the ENTER piston to save the change. The request
for confirmation appears on the display. Use the - and +
pistons to select No or Yes.
User Manual Classic 250/350
Classic Mem: 1
Tr: 0/440 Cr: 0
Johannus Menu:
Crescendo
Johannus Menu:
Key Volumes
Key Volumes
Adjust
Enter code:
_ _ _ _
Select a stop
to adjust
Key: press a key
Vol: -/+
Key: 3 C
Vol: 83 -/+
Save changes?
No/Yes
26