Crescendo; Datadump - Johannus classic 250 User Manual

4. Use the - and + pistons to select the desired location.
- Console: at the console of the organ
- Front:
- Center: in the middle of the church
- Rear:
5. Press the ENTER piston to confirm and to return to the
Johannus Menu.
6. Press the MENU piston to exit the Johannus Menu.
5.2

Crescendo

The crescendo pedal contains 20 pre-programmed registrations. These registrations start with
very quiet (pianissimo) to very loud (tutti). These pre-programmed registrations can be
changed.
Step 0 of the crescendo pedal cannot be changed.
1. Press the MENU piston.
Use the - and + pistons to select the Crescendo
2.
function on the display.
3. Press the ENTER piston. The first step of the crescendo
pedal appears on the display.
4. Use the - and + pistons to select the step which has to
be changed (for example step 5).
5. Change the registration and press the ENTER piston to
save the new registration in the memory of the organ.
6. Repeat steps 4 and 5 if more crescendo pedal steps
have to be changed.
7. Press the MENU piston twice to exit the Johannus
Menu.
5.3

Datadump

The Datadump function sends several settings from the organ to a storage medium (the
Johannus MIDI Sequencer+, for example) through the MIDI SEQ output. See § 3.4 External
connections.
User Manual Classic 250/350
in front of the church
at the back of the church
Ambiance
Location Center
Johannus Menu:
Ambiance
Am:Center Mem: 1
Tr: 0/440 Cr: 0
Johannus Menu:
Crescendo
Johannus Menu:
Crescendo
Crescendo
Cres. step: 0
Crescendo
Cres. step: 5
Classic Mem: 1
Tr: 0/440 Cr: 0
21