Reset Procedures - Johannus classic 250 User Manual

6. Press a key on the manual or pedal on which the solo-
or orchestral voice has to be assigned. The new
assignment appears on the display.
7. Press the MENU piston three times to exit the Johannus
Menu.

5.11 Reset Procedures

The Reset Procedures function can be used to reset a number of settings to the factory
settings.
1. Press the MENU piston.
Use the - and + pistons to select the Reset
2.
Procedures function on the display.
3. Press the ENTER piston. The first option of the Reset
Procedures appears on the display.
4. Use the - and + pistons to select the desired reset procedure:
- Crescendo def.:
- Expr. Pedals:
- Memory default:
- MIDI default:
- Orchestrals def.: Resets the factory settings of the solo- and orchestral voices.
- Preset default:
- Reverb default:
The following reset procedure is only available if the organ is equipped with the optional
Platinum Voice Package:
- Spec. Stop def.:
5. Press the ENTER piston. A question to confirm appears
on the display.
Use the - and + pistons to select No or Yes. Press the
6.
ENTER piston to confirm and to return to the Reset
Procedures menu.
7. Press the MENU piston twice to exit the Johannus
Menu.
User Manual Classic 250/350
Resets the factory settings of the 20 steps of the crescendo
pedal.
Resets the factory settings of the expression pedals.
Clears the entire capture memory.
Resets the factory settings of the MIDI stops.
Resets the factory settings of the pre-programmed memory
locations.
Resets the factory settings of the reverb.
Resets the factory settings of some special settings for some
orchestral voices.
Panflute
Assigned: Swell
Classic Mem: 1
Tr: 0/440 Cr: 0
Johannus Menu:
Crescendo
Johannus Menu:
Reset Procedures
Reset Procedures
Crescendo def.
Crescendo def.
No/Yes
Reset Procedures
Crescendo def.
Classic Mem: 1
Tr: 0/440 Cr: 0
31