Table of Contents
Advertisement
Inner Door Gasket Replacement
Inner Door Gasket Replacement Procedure
If the information in these instructions is not followed exactly, a fire or explosion may re-
sult causing property damage, personal injury, or death.
Step 1.
Completely remove all gasket and adhesive residue from the right and
left side inner doors, as needed.
Step 2.
Using RTV sealant, apply a 1/8" bead to
secure the inner door gasket to the inner door sections.
Refer to the illustration for proper application. Note the
overlap configuration in the flange area of the inner door.
Set the flange section first, and this will help to achieve the
proper overlap position.
Recommended pattern for RTV sealant
Page 30
30
WARNING
Gasket Overlap must be as
Gasket Overlap must be as
shown + 1/32
shown + 1/32
Expanded view
Enlarged
view of
flange area
Advertisement
Table of Contents
