Table of Contents
Advertisement
Anode Inspection
Step 2.
Unplug the water heater from the wall outlet.
Step 3.
Disconnect the vent system from the draft hood that is mounted on top of
the blower.
Step 4.
Unplug the cord sets from the blower.
Step 5.
Remove the (3) blower mounting screws using a 1/4" nut driver and
retain for later use.
Page 26
26
Blower (water heater)
power cord
Draft hood
Blower
Cord sets
1/4" nut driver
Vent system
Advertisement
Table of Contents
