Electrical System Maintenance; Servicing The Battery - Toro 74946 Operator's Manual

With 60in and 72in turbo force side discharge mower
Hide thumbs Also See for 74946:
Table of Contents

Advertisement

Electrical System
Maintenance

Servicing the Battery

Service Interval: Monthly
WARNING
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead compounds,
chemicals known to the State of California
to cause cancer and reproductive harm.
Wash hands after handling.
DANGER
Battery electrolyte contains sulfuric acid, which is a
deadly poison and causes severe burns.
Do not drink electrolyte and avoid contact with skin,
eyes, or clothing. Wear safety glasses to shield your
eyes and wear rubber gloves to protect your hands.
Removing the Battery
WARNING
Battery terminals or metal tools could short against
metal machine components, causing sparks. Sparks
can cause the battery gasses to explode, resulting
in personal injury.
• When removing or installing the battery, do not
allow the battery terminals to touch any metal
parts of the machine.
• Do not allow metal tools to short between
the battery terminals and metal parts of the
machine.
WARNING
Incorrect battery cable routing could damage the
machine and cables, causing sparks. Sparks can
cause the battery gasses to explode, resulting in
personal injury.
• Always disconnect the negative (black) battery
cable before disconnecting the positive (red)
cable.
• Always connect the positive (red) battery cable
before connecting the negative (black) cable.
1. Disengage the blade-control switch (PTO), move the
motion-control levers to the N
and set the parking brake.
2. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3. Disconnect the negative battery cable (black) from the
negative (-) battery terminal
4. Slide the red terminal boot off the positive (red) battery
terminal, and remove the positive (+) battery cable
(Figure
57).
5. Remove the wing nut securing the battery clamp
(Figure
57).
6. Remove the clamp
7. Remove the battery.
45
-
EUTRAL
LOCK
(Figure
57).
(Figure
57).
Figure 57
position,
G008804

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

74947Z master professional 6000 series

Table of Contents