Drive System Maintenance; Checking The Seat Belt; Checking The Rollover-Protection-System (Rops) Knobs - Toro 74946 Operator's Manual

Drive System
Maintenance

Checking the Seat Belt

Service Interval: Before each use or daily
Inspect the seat belt for wear, cuts, and proper operation of
the retractor and buckle. Replace the seat belt if it is damaged.
Checking the
Rollover-Protection-System
(ROPS) Knobs
Service Interval: Before each use or daily
WARNING
To avoid injury or death from rollover: keep the roll
bar in the fully raised locked position and use the
seat belt.
Ensure that the seat is secured to the machine.
Check that both the mounting hardware and the knobs are in
good working condition. Make sure that the knobs are fully
engaged with the ROPS in the raised position. The upper
hoop of the roll bar may need to be pushed forward or pulled
rearward to fully engage both knobs (Figure 60).
47
Figure 60
1. ROPS knob (locked
position)
2. Pull the ROPS knob out,
and rotate it 90 degrees
to change the roll bar
position.
3. Roll bar in the upright
position
4. Roll bar in the folded
position