DeWalt DW746 Safety Instructions page 38

E N G L I S H
- Cast iron wings DE7462
- Dust extraction kit DE7470
Sharp edges.
Consult your dealer for further information on the appropriate accessories.
Maintenance
Your D WALT machine has been designed to operate over a long period
E
of time with a minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Cleaning
Keep the ventilation slots clear and regularly clean the housing with a soft cloth.
• Regularly clean the table top.
• Regularly clean the dust collection system.
Maintaining the table top
If you notice signs of rust on the table top:
• Carefully remove the rust using steel wool.
• Carefully clean the table top using a mild solvent cleaner.
• Apply paste wax to the table top and remove the wax soon afterward
to prevent a sticky build-up.
Maintaining the fence system
The rip fence should always slide freely. If excessive force is needed to
slide the rip fence:
• Wipe the rails and the gliding surface of the fence head using a cloth or
paper towel.
If the rip fence still does not slide freely:
• Clean the fence head and rails using a mild solvent cleaner.
• Coat the rails with paste wax or light oil.
• Slide the fence back and forth several times.
• Wipe off any excess wax or oil from the rails.
If the gliding surface of the fence head is damaged, consult
your dealer.
Cleaning and lubricating the height and bevel gear (fig. A1, A2 & T1 - T3)
• On a daily basis, remove sawdust from the height and bevel gear system.
The height and bevel gear system should be periodically lubricated.
• Set the bevel angle to 0° using the adjuster (14) (fig. A2).
• Set the saw blade to its highest position using the adjuster (2) (fig. A1).
• Clean and lubricate the curved slots (103) (fig. T1 & T2).
• Lubricate the support (107).
• Clean and lubricate the worm (104) and the shiny washer just behind
(fig. T2).
• Set the bevel angle to 45° using the adjuster (14) (fig. A2).
• Set the saw blade to its lowest position using the adjuster (2) (fig. A1).
• Clean and lubricate the worm (105) and the shiny washer just to the left
(fig. T3).
• Clean and lubricate the gears (106).
Lubricating the fence head (fig. T4)
The moving parts of the fence head should be regularly lubricated.
• Apply a suitable grease to the area between the cams and locking
levers and between the cams and the fence head casting (fig. T4).
Lubricating the height pivot pin (fig. A1 & T5)
• Set the saw blade to its lowest position using the adjuster (2).
• Lubricate the rear end of the pin (108) using light oil.
en - 8
Unwanted tools and the environment
Take your tool to an authorized D
disposed of in an environmentally safe way.
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the performance of your
D WALT machine, simply return it within 30 days, complete as
E
purchased, to the point of purchase, for a full refund or exchange.
Proof of purchase must be produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your D
12 months following purchase, it will be undertaken free of charge at
an authorized D WALT repair agent. Proof of purchase must be
E
produced. Includes labour and spare parts for Power Tools. Excludes
accessories.
• ONE YEAR WARRANTY •
If your D WALT product becomes defective due to faulty materials or
E
workmanship within 12 months from the date of purchase, we
guarantee to replace all defective parts free of charge or, at our
discretion, replace the unit free of charge provided that:
• The product has not been misused.
• Repairs have not been attempted by unauthorized persons.
• Proof of purchase date is produced.
This guarantee is offered as an extra benefit and is additional to
consumers statutory rights.
For the location of your nearest authorized D
please use the appropriate telephone number on the back of this
manual. Alternatively, a list of authorized D
details on our after-sales service are available on the Internet at
www.2helpU.com.
WALT repair agent where it will be
E
GUARANTEE
WALT machine, in the
E
WALT repair agent,
E
WALT repair agents and full
E
26