2 Setup
Setup procedure
Complete the following steps to setup the Gateway:
1 Connect your Gateway to your service provider's network.
For more information, see
2 Power on the Gateway.
For more information, see
3 Connect your wired devices to the Gateway.
For more information, see
4 Connect your wireless devices to the Gateway.
For more information, see
5 Connect your phones.
For more information, see
Optional configuration
After completing the setup procedure, the Gateway is ready for use. Optionally, you can further configure the Gateway to your
needs (for example, change the wireless security) using the Gateway's Admin Tool.
For more information, see
DMS-CTC-20140127-0004 v1.0
"2.1 Connect the Gateway to your service provider's network" on page
"2.2 Power on the Gateway" on page
"2.3 Connect your wired devices" on page
"2.4 Connect your wireless devices" on page
"2.5 How to connect your phone" on page
"3 Admin Tool" on page
25.
15.
16.
17.
27.
2 SETUP
14.
13