Connect Your Wired Devices - Technicolor MediaAccess TC8717T Setup And User Manual

Hide thumbs Also See for MediaAccess TC8717T:
Table of Contents

Advertisement

2.3 Connect your wired devices

Requirements
Both your network device (for example, a computer, a gaming console, etc.) and Gateway must have a free Ethernet port.
Your network device must be configured to obtain an IP address automatically. This is the default setting.
All Ethernet ports on the Gateway are Gigabit Ethernet ports and have a maximum speed of 1 Gbps (Gigabit per second).
Procedure
Proceed as follows:
1 Take the yellow Ethernet cable that is included in your box.
2 Plug one end of the Ethernet cable into one of the yellow Ethernet ports on the back of the Gateway:
3 Plug the other end of the Ethernet cable into the Ethernet port of your network device.
4 Your network device is now connected to your network. Use the same procedure to connect your other Ethernet devices
(computers, network printers and so on).
16
DMS-CTC-20140127-0004 v1.0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents