Before Installation - KKT KOLBE FLAT INSEL ED User Manual

Installation of the hood

. Before installation

!
. Betriebsmodi
Exhaust air mode
ohne Kohleilter
!
Please see installation speciica-
tion in chapter . .
Gewerbliches inhaltliches Kopieren verboten! Gewerbliches inhaltliches Kopieren verboten!
Clean the area thoroughly before installation, so that at the irst time, no
dust or debris can be aspirated.
The exhaust hose must not be routed together with gas pipes, hot-air
pipes, etc. through a chute. The exhaust tube
should be as straight as possible carried away from the cover and guided
at a maximum delection of
outer wall.
In order to avoid accumulations of fat in a corner, make sure when instal-
ling that the hood is suspended horizontally.
° towards the outside and secured to the
Installation for circulating air ilter
mode
Same procedure
as described un-
der the following
chapter B. Howe-
ver, omit step .
In addition it the
carbon ilter s
A before moun-
ting the grease
ilter Fig. A