Listening To Am/Fm Stations - Onkyo HT S5100 Instruction Manual

Listening to the Radio—Continued

Listening to AM/FM Stations

ON/STANDBY
STANDBY
DOCK MULTI CH DVD
PHONES
A SPEAKERS B TONE
With the built-in tuner, you can enjoy AM and FM radio
stations and store your favorite stations as presets for
easy selection.
Use the [TUNER] input selector
button to select AM or FM.
In this example, FM has been selected.
TUNER
(Actual display depends on country.)
Tuning into AM/FM Radio Stations
■ Auto Tuning Mode
1
Press the [TUNING MODE] button
so that the AUTO indicator
TUNING MODE
appears on the display.
2 Press the TUNING Up or Down
[ ]/[ ] button.
TUNING
Searching stops when a station is
found.
When tuned into a station, the TUNED indicator
appears. When tuned into a stereo FM station, the FM
STEREO indicator also appears.
52
TUNER TUNING
TUNING PRESET
ENTER
VCR/DVR CBL/SAT AUX TAPE TUNER CD SETUP RETURN
SETUP MIC
MOVIE/TV MUSIC GAME DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE
CLEAR
TUNING MODE
Band Frequency
FM STEREO
AUTO
■ Manual Tuning Mode
1
TUNING MODE
MASTER VOLUME
AUX INPUT
2
VIDEO L AUDIO R
HT-R560
AV RECEIVER
TUNING
Frequency changes in 0.05MHz steps for FM and 9kHz
(or 10kHz) steps for AM.
In Manual Tuning mode, FM stations will be in mono.
Tuning into Weak FM Stereo Stations
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to
Manual Tuning mode and listen to the station in mono.
Note:
• You can also use the remote controller's Up and Down
[ ]/[
TUNED
Press the [TUNING MODE] button
so that the AUTO indicator disap-
pears from the display.
Press and hold the TUNING Up or
Down [ ]/[ ] button.
The frequency stops changing when
you release the button.
Press the button repeatedly to change
the frequency one step at a time.
] buttons to tune the radio.