Listening to the Radio
Listening to AM/FM stations
STANDBY/ON
STANDBY
MULTI CH
DVD
VIDEO
PHONES
SPEAKERS
A
B
TONE
With the built-in tuner, you can enjoy AM and FM radio
stations.
1
Use the [TUNER] input selector
TUNER
button to select AM or FM.
In this example, FM has been selected.
(Actual display depends on country.)
■ AM Frequency Step Setup (not North America)
You must specify the AM frequency step used in your
area. Note that when this setting is changed, all radio
presets are deleted.
1
Press the [SETUP] button, use the Up
and Down [
Hardware Setup," and then press
[ENTER].
2
Use the Up and Down [
to select "AM Freq," and then use the
Left and Right [
select:
10 kHz: Select if 10 kHz steps are used in your
area.
9 kHz: Select if 9 kHz steps are used in your
area.
3
Press the [SETUP] button.
Setup closes.
38
TUNER
TUNING
TUNING
PRESET
ENTER
1
VIDEO
2
VIDEO
3
TAPE
TUNER
C D
RETURN
SETUP
VCR
DIGITAL
TUNING
STEREO
LISTENING MODE
DISPLAY
INPUT
DIMMER
MEMORY
MODE
CLEAR
TUNING MODE
Band
Frequency
]/[
] buttons to select "0.
]/[
]/[
] buttons to
Tuning into AM/FM Radio Stations
■ Auto Tuning Mode
1
TUNING
MODE
MASTER VOLUME
VIDEO
3 INPUT
VIDEO
L
AUDIO
R
2
TUNING
■ Manual Tuning Mode
1
TUNING
MODE
2
TUNING
The American model changes FM frequency in 0.2 MHz
steps, 10 kHz steps for AM. For other models it's
0.05 MHz steps for FM and 9 kHz (or 10 kHz) steps for
AM.
When tuned into a station, the TUNED indicator
] buttons
appears. When tuned into a stereo FM station, the FM
STEREO indicator also appears.
Tuning into Weak FM Stereo Stations
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to
Manual Tuning mode and listen to the station in mono.
Note:
• You can also use the remote controller's Up and Down
[
]/[
Press the [TUNING MODE] button
so that the AUTO indicator
appears on the display.
Press the TUNING Up or Down
[ ]/[ ] button.
PRESET
Searching stops when a station is
found.
Press the [TUNING MODE] button
so that the AUTO indicator disap-
pears from the display.
Press and hold the TUNING Up or
Down [ ]/[ ] button.
PRESET
The frequency stops changing when
you release the button.
Press the buttons repeatedly to change
the frequency one step at a time.
] buttons to tune the radio.
TUNED
AUTO
FM STEREO