Digital Input Setup; Changing The Input Display - Onkyo HT S5100 Instruction Manual

First Time Setup—Continued

Digital Input Setup

ON/STANDBY
STANDBY
DOCK MULTI CH DVD
PHONES
TONE
A SPEAKERS B
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example,
if you connect your CD player to OPTICAL IN 1, you
must assign OPTICAL IN 1 to the CD input selector.
These are the default assignments.
Input selector
DVD
VCR/DVR
CBL/SAT
AUX
TAPE
CD
1
Press the input selector button
for the input selector that you
want to assign.
The TUNER and DOCK input selectors
DVD VCR/DVR CBL/SAT
cannot be assigned and are fixed at the
"- - -" option.
AUX TAPE TUNER
CD
2
Press the [DIGITAL INPUT]
button.
DIGITAL INPUT
The current assignment is displayed.
3 Press the [DIGITAL INPUT] but-
ton repeatedly to select an
DIGITAL INPUT
option.
COAX1: Select if the component is
COAX2: Select if the component is
OPT1: Select if the component is
46
TUNING PRESET
ENTER
VCR/DVR CBL/SAT AUX TAPE TUNER CD
SETUP RETURN
SETUP MIC VIDEO
DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE
MOVIE/TV MUSIC GAME
CLEAR
1 2, 3
Audio input
COAX1
OPT1
COAX2
- - -
- - -
OPT2
connected to DIGITAL IN
COAXIAL 1.
connected to DIGITAL IN
COAXIAL 2.
connected to DIGITAL IN
OPTICAL 1.
MASTER VOLUME
AUX INPUT
L AUDIO R
Note:
HT-R560
AV RECEIVER
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.

Changing the Input Display

If you connect an
or CD recorder to the TAPE IN/OUT jacks, or to the
CBL/SAT jacks, for
change this setting.
This setting can only be changed on the AV receiver.
ON/STANDBY
STANDBY
DOCK
PHONES
1
TAPE
or
CBL/SAT
2
TAPE
or
CBL/SAT
OPT2: Select if the component is
connected to DIGITAL IN
OPTICAL 2.
- - -: Select if the component is
connected to an analog
input.
-capable Onkyo MiniDisc recorder
to work properly, you must
1, 2 1, 2
MULTI CH DVD VCR/DVR CBL/SAT AUX TAPE TUNER CD
A SPEAKERS B TONE MOVIE/TV MUSIC GAME DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE
CLEAR
Press the [TAPE] or [CBL/SAT]
input selector button so that
"TAPE" or "CBL/SAT" appears on
the display.
Press and hold down the [TAPE]
or [CBL/SAT] input selector but-
ton (about 3 seconds) to change
the setting.
Repeat this step to select MD or CDR.
For the TAPE input selector, the setting
changes in this order:
→ →
TAPE MD CDR
MASTER VOLUME
TUNING PRESET
ENTER
SETUP RETURN
AUX INPUT
SETUP MIC L AUDIO R
VIDEO
HT-R560
AV RECEIVER