Listening To The Radio; Listening To Am/Fm Stations - Onkyo HT-R550 Instruction Manual

Listening to the Radio

Listening to AM/FM Stations

STANDBY/ON
STANDBY
MULTI CH DVD
PHONES
A SPEAKERS B TONE
With the built-in tuner, you can enjoy AM and FM radio
stations.
1 Use the [TUNER] input selector
button to select AM or FM.
In this example, FM has been selected.
TUNER
(Actual display depends on country.)
■ AM Frequency Step Setup (not North America)
You must specify the AM frequency step used in your
area. Note that when this setting is changed, all radio
presets are deleted.
1 Press the [SETUP] button, use the Up
and Down [
Hardware Setup," and then press
[ENTER].
2
Use the Up and Down [
to select "AM Freq," and then use the
Left and Right [
select:
10 kHz: Select if 10 kHz steps are used in
9 kHz: Select if 9 kHz steps are used in
3 Press the [SETUP] button.
Setup closes.
44
TUNER
TUNING
TUNING PRESET
VCR/DVR CBL/SAT AUX TAPE TUNER C D
SETUP ENTER RETURN
SETUP MIC
STEREO LISTENING MODE DISPLAY DIGITAL INPUT DIMMER MEMORY TUNING MODE
CLEAR
TUNING MODE
Band Frequency
]/[ ] buttons to select "0.
]/[ ] buttons
]/[ ] buttons to
your area.
your area.
Tuning into AM/FM Radio Stations
■ Auto Tuning Mode
1
TUNING MODE
MASTER VOLUME
AUX INPUT
VIDEO L AUDIO R
2
TUNING PRESET
■ Manual Tuning Mode
1
TUNING MODE
2
TUNING PRESET
The American model changes FM frequency in 0.2 MHz
steps, 10 kHz steps for AM. For other models it's
0.05 MHz steps for FM and 9 kHz (or 10 kHz) steps for
AM.
When tuned into a station, the TUNED indicator
appears. When tuned into a stereo FM station, the FM
STEREO indicator also appears.
Tuning into Weak FM Stereo Stations
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to
Manual Tuning mode and listen to the station in mono.
Note:
• You can also use the remote controller's Up and Down
[ ]/[
Press the [TUNING MODE] button
so that the AUTO indicator
appears on the display.
Press the TUNING Up or Down
[ ]/[ ] button.
Searching stops when a station is
found.
Press the [TUNING MODE] button
so that the AUTO indicator disap-
pears from the display.
Press and hold the TUNING Up or
Down [ ]/[ ] button.
The frequency stops changing when
you release the button.
Press the buttons repeatedly to change
the frequency one step at a time.
] buttons to tune the radio.
FM STEREO
AUTO
TUNED