Listening To The Radio; Listening To Am/Fm Stations - Onkyo HT HT-S990THX Instruction Manual

Listening to the Radio

Listening to AM/FM stations

STANDBY/ON
STANDBY
MULTI CH DVD VIDEO 1 VIDEO 2 VIDEO 3
VCR
PHONES
SPEAKERS
A B TONE THX LISTENING MODE
With the built-in tuner, you can enjoy AM and FM radio
stations.
1 Use the [TUNER] input selector
TUNER
button to select AM or FM.
In this example, FM has been selected.
Band
(Actual display depends on country.)
Tuning into AM/FM Radio Stations
■ Auto Tuning Mode
1 Press the [TUNING MODE] button
TUNING
MODE
so that the AUTO indicator
appears on the display.
2 Press the TUNING Up or Down
[ ]/[ ] button.
TUNING PRESET
Searching stops when a station is
found.
TUNER
TUNING
MASTER VOLUME
TUNING PRESET
ENTER
TAPE TUNER C D RETURN SETUP
VIDEO 3 INPUT
VIDEO L AUDIO R
DIGITAL TUNING
DISPLAY INPUT DIMMER MEMORY MODE
CLEAR
TUNING MODE
Frequency
■ Manual Tuning Mode
1
Press the [TUNING MODE] button
TUNING
MODE
so that the AUTO indicator disap-
pears from the display.
2 Press and hold the TUNING Up or
Down [ ]/[ ] button.
TUNING PRESET
The frequency stops changing when
you release the button.
Press the buttons repeatedly to change
the frequency one step at a time.
The American model changes FM frequency in 0.2 MHz
steps, 10 kHz steps for AM. For other models it's
0.05 MHz steps for FM and 9 kHz (or 10 kHz) steps for
AM.
When tuned into a station, the TUNED indicator
appears. When tuned into a stereo FM station, the FM
STEREO indicator also appears.
Tuning into Weak FM Stereo Stations
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to
Manual Tuning mode and listen to the station in mono.
Note:
• You can also use the remote controller's Up and Down
[ ]/[ ] buttons to tune the radio.
TUNED AUTO
FM STEREO
39