Changing The Engine Oil And Filter - Toro 30643 Operator's Manual

Figure 50
Note: When using different oil, drain all old oil from
the crankcase before adding new oil.
Changing the Engine Oil and
Filter
Service Interval: Every 250 hours
1. Start the engine and let it run 5 minutes to allow the
oil to warm up.
2. Park the machine on a level surface, shut off the engine,
remove the key, and wait for all moving parts to stop
before leaving the operating position.
3. Replace the engine oil and filter
4. Add oil to the crankcase; refer to
Engine-Oil Level (page
48
(Figure 51).
Figure 51
Checking the
47).