Table of Contents
Advertisement
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
Media and Additional Parts
Description
Operator's Manual
Engine owner's Manual
Parts Catalog
Operator training materials
Declaration of Conformity
Note: Determine the left and right sides of the machine
from the normal operating position.
1
Greasing the Machine
No Parts Required
Procedure
Before operating the machine, grease it to ensure proper
lubricating characteristics; refer to
Bushings (page
44).
Important: Failure to properly grease the machine will
result in premature failure of critical parts.
Description
No parts required
Warning decal
No parts required
No parts required
Greasing the Bearings and
Qty.
–
1
–
–
Qty.
1
Review before operating machine
1
Use to reference engine information
1
Use to reference part numbers
1
Review before operating machine
1
2
Replacing the Warning Decal
For CE Models Only
Parts needed for this procedure:
1
Warning decal
Procedure
On machines requiring European CE compliance, replace
the warning decal Part No. 117-2754 with the warning decal
Part No. 117-2766.
15
Use
Grease the machine.
Replace the warning decal.
Check the tire pressure.
Check the fluid levels.
Use
Advertisement
Table of Contents
