Important: Do not use more than 3 shims at any 1
hole location. Use decreasing numbers of shims
in adjacent holes if more than 1 shim is added to
any 1 hole location.
8. Adjust the idler pulley and install the belt covers.
Cab Maintenance
Pressure Washing the Cab
Important: Use care around cab seals and lights
(Figure
91). If you are using a pressure washer, keep the
washer wand at least 0.6 m (2 ft) away from the machine.
Do not use pressure washer directly on cab seals and
lights or under rear overhang.
1
1. Seal
2. Light
67
2
3
G034330
Figure 91
3. Keep wand 0.6 m (2 feet)
away.
4. Do not pressure-wash
under the rear overhang.
4