2
3
4
8
5
6 or 7
Figure 6
1. Clutch
2. Clutch connector
3. Pulley spacer
4. Drive pulley assembly
5. Curved washers
1
5
6 or 7
m–6007
6. Bolt, 7/16 x 4–1/2 inch for
Kawasaki engines
7. Bolt, 7/16 x 4 inch for
Kohler engines
8. Drive spacer
No parts needed for this step.
Removing the Drive Wheels
Danger
Mechanical or hydraulic jacks may fail to support
machine and cause a serious injury.
Use jack stands when supporting machine.
Do not use hydraulic jacks.
1. Loosen the drive wheel lugs or nuts.
2. Raise the rear of the machine and support with jack
stands.
3. Remove the drive wheels.
8