Onkyo TX-SR604 Instruction Manual page 8

Front & Rear Panels—Continued
H
Arrow/TUNING/PRESET & ENTER buttons
When the AM or FM input source is selected, the
TUNING [ ] [
tuner, and the PRESET [
to select radio presets (see page 53). When the
onscreen setup menus are used, they work as arrow
buttons and are used to select and set items. The
[ENTER] button is also used with the onscreen
setup menus.
I
SETUP button
This button is used to access the onscreen setup
menus that appear on the connected TV.
J
MASTER VOLUME control (49)
This control is used to adjust the volume of the AV
receiver to MIN, 1 through 99, or MAX.
K
VIDEO 4 INPUT
This input can be used to connect a camcorder,
game console, and so on. There are jacks for optical
digital audio, S-Video, composite video, and analog
audio.
L
SETUP MIC (38)
The included speaker setup microphone is con-
nected here for automatic speaker setup.
M
TUNING MODE button (52)
This button is used to select the Auto or Manual tun-
ing mode.
N
MEMORY button (53)
This button is used when storing or deleting radio
presets.
O
DIMMER or RT/PTY/TP button (51, 55)
DIMMER is used to adjust the display brightness.
On the European model, this is the RT/PTY/TP but-
ton, and it's for RDS (Radio Data System). See
"Using RDS (European models only)" on page 54.
P
DIGITAL INPUT button (44, 77)
This button is used to assign the digital inputs and to
specify the format of digital input signals.
Q
DISPLAY button (50)
This button is used to display various information
about the currently selected input source.
R
LISTENING MODE [
These buttons are used to select the listening modes.
S
STEREO button (61)
This button is used to select the Stereo listening
mode.
T
TONE, [–] & [+] buttons (50)
These buttons are used to adjust the bass and treble.
U
ZONE 2 LEVEL button (82)
This button is used to set the volume for Zone 2.
V
ZONE 2/OFF button (81)
The ZONE 2 button is used to select the input
source for Zone 2.
8
] buttons are used to tune the
] [ ] buttons are used
] [ ] buttons (61)
The OFF button is used to turn off the output of
Zone 2.
W
PHONES jack (51)
This 1/4-inch phone jack is for connecting a stan-
dard pair of stereo headphones for private listening.
X
PURE AUDIO button and indicator (61)
The North American models do not have this button
and indicator.
Selects the Pure Audio listening mode. The indica-
tor lights up when this mode is selected.