Advanced Operations; Using The Late Night Function (Dolby Digital Only); Using The Cinemafilter; Adjusting Individual Speaker Levels - Onkyo TX-SR604 Instruction Manual

Advanced Operations

RECEIVER
CH SEL
L NIGHT
Using the Late Night Function
(Dolby Digital only)
With the Late Night function, you can reduce the
dynamic range of Dolby Digital material so that you can
still hear quiet parts even when listening at low volume
levels—ideal for watching movies late at night when you
don't want to disturb anyone.
Press the [RECEIVER] button,
RECEIVER
and then press the [L NIGHT]
button repeatedly to select:
Low: Small reduction in dynamic
L NIGHT
High: Big reduction in dynamic
Notes:
• The effect of the Late Night function depends on the
Dolby Digital material that you are playing, and with
some material there will be little or no effect.
• The Late Night function is set to Off when the AV
receiver is set to Standby.
66
REMOTE MODE
ON/STANDBY
ZONE2
RECEIVER DVD
TAPE
INPUT SELECTOR M D/CDR
C D
1 2 3
HDD
V 1 V 2 V 3
T V
4 5 6
V 4
MULTI CH DVD
7 8 9 VCR
TAPE TUNER C D
CABLE
10 11 12
+ 10
0
CLR SAT
D TUN ENT
--/--- DIMMER SLEEP
CH
T V VOL VOL
DISC
ALBUM
LISTENING MODE
STEREO SURROUND
LEVEL –/+
AUDIO SUBTITLE RANDOM REPEAT
LEVEL - LEVEL +
TEST TONE CH SEL
CINE FLTR
PLAY MODE
DISPLAY L NIGHT CINE FLTR
VCR DVD HDD
RC- 651 M
Off: Late Night function off.
range.
range.

Using the CinemaFILTER

With the CinemaFILTER, you can soften overly bright
movie soundtracks, which are typically mixed for repro-
duction in a movie theater.
CinemaFILTER can be used with the following listening
modes: Dolby Digital, Dolby Digital EX, Dolby Pro
Logic IIx Movie, Dolby Pro Logic II Movie, DTS, DTS-
ES, DTS Neo:6 Cinema, DTS 96/24, Dolby/DTS+PLIIx
Movie, Dolby/DTS+Neo:6, and DTS+Dolby EX.
Press the [RECEIVER] button,
RECEIVER
and then press the [CINE FLTR]
button repeatedly to select:
On: CinemaFILTER on.
Off: CinemaFILTER off.
CINE FLTR

Adjusting Individual Speaker Levels

You can adjust the level of individual speakers during
playback. These adjustments are temporary and will be
cancelled when the AV receiver is set to Standby.
Press the [RECEIVER] button,
use the [CH SEL] button to select
RECEIVER
each speaker, and use the
[LEVEL–] and [LEVEL+] buttons
to adjust the volume.
Speakers are selected in the following
CH SEL
order: Front Left
→
Right
→
Right
→
Subwoofer.
You can adjust the volume of each
LEVEL - LEVEL +
speaker from –12 dB to +12 dB
(–15 dB to +12 dB for the subwoofer).
The name of the currently selected
speaker and its volume appear on the
display, as shown.
Notes:
• You cannot use this function while the AV receiver is
muted.
• Speakers that are set to No or None in the Speaker
Configuration cannot be adjusted.
→ →
Center Front
→
Surr Right Surr Back
→
Surr Back Left Surr Left