Installation; Side-By-Side; Location - Miele FN 35402 i Operating And Installation Instructions

Side-by-side

FNS 35402 i and FNS 37402 i freezers
have two foamed in side-wall heaters
enabling them to be installed side-by-
side with other appliances. Each appli‐
ance must be installed in its own niche.
Your dealer will be able to advise you
on which combination of models is
possible.
This appliance must be built in, oth‐
erwise it could tip up.

Location

This appliance should not be installed
where it is exposed to direct sunlight or
directly adjacent to a heat-producing
appliance such as an oven or a radiator.
The higher the ambient temperature of
the room, the more energy the appli‐
ance requires to operate. The appliance
should be installed in a dry, well ventila‐
ted room.
When installing the appliance, please
note:
– The socket must be easily accessible
in an emergency, not concealed be‐
hind the appliance.
– The plug and cable must not touch
the rear of the appliance as they
could be damaged by vibrations from
the appliance.
– Do not plug in other appliances be‐
hind this appliance.
Important. In environments with
high humidity condensation can build
up on external appliance panels. This
can lead to corrosion of the panels.
For prevention, it is advisable to install
the appliance with sufficient ventila‐
tion in a dry and/or an air-conditioned
room. Please ensure that the appli‐
ance door closes properly, the ventila‐
tion gaps are not covered over and
the appliance is installed in accord‐
ance with these installation instruc‐
tions.

Installation

57