Installing the appliance
Fitting a door front which is heavier
than the maximum permitted could
damage the hinges. This can cause
subsequent functional problems.
Before fitting furniture doors, ensure
that the weight of the door does not ex‐
ceed the maximum permitted:
Appliance
FN 35402 i
FN 37402 i
FNS 35402 i
FNS 37402 i
When fitting large or divided furniture
doors an extra fitting kit or set of fixing
brackets should be used. These are
available to order from Miele.
76
Maximum weight
of furniture door
in kg
21
26
21
26
A gap of 8 mm is set ex-works be‐
tween the appliance door and the fix‐
ing bracket. Double check this gap
and reset it if necessary.
Push fitting aids up to the height of
the furniture door: the lower edge X
of the fitting aids must be at the
same height as the upper edge of the
furniture door being fitted (see on
the diagram).