Installing the appliance
Drill holes in the furniture door and
fit screws . Make sure the two met‐
al edges are aligned (Symbol //).
Close the appliance door and the fur‐
niture door.
- Depth adjustment (Z)
Loosen screws at the top of the
appliance door, and screw on the
fixing bracket at the bottom. By mov‐
ing the furniture door, create a gap of
2 mm between the furniture door and
the housing unit.
80
Tighten all screws again.
Replace top cover , and click it into
place.
Replace side covers , making sure
you hear them click into place.