Switching off Demo mode
The symbol is lit up in the display.
Touch the settings sensor.
All symbols available for selection will
appear in the display and the symbol
flashes.
Touch the sensors for setting the
temperatures ( or ) until the
symbol flashes.
Touch the OK sensor to confirm your
selection.
1 flashes in the display (means: Demo
mode is activated) and the symbol
lights up.
Information for dealers
Touch the or sensor until 0 ap‐
pears (means: Demo mode is switch‐
ed off).
Touch the OK sensor to confirm your
selection.
The selected setting is applied, the
symbol flashes.
Touch the settings sensor to leave
settings mode.
Otherwise the appliance exits set‐
tings mode automatically after ap‐
proximately one minute.
The Demo mode is switched off, the
symbol goes out.
55