Miele FN 35402 i Operating And Installation Instructions page 73

  Align the appliance on both sides
by altering the adjustable feet using
the spanner supplied.
If the all round gap of 42 mm is not
maintained between the appliance
housing and the front edge of the
housing unit side wall, the door may
not shut properly.
This can cause ice to build up, con‐
densate to accumulate and lead to
faults in the appliance. These can all
lead to increased energy consump‐
tion.
Installing the appliance
Securing the appliance in the
niche
 Press the appliance against the side
of the housing unit on the hinge side.
 Screw chipboard screws  through
the hinge plates at the top and bot‐
tom to secure the appliance to the
housing unit.
73