Switching on and off
Before using for the first time
Packaging material
Remove all packaging material from
the inside of the appliance.
Cleaning
Please refer to the relevant instruc‐
tions in "Cleaning and care".
Clean the inside of the appliance and
the accessories.
Operating the appliance
A light touch of the finger on the sen‐
sors is all that is required to operate this
appliance.
A tone will sound each time a sensor is
touched. You can deactivate this, if you
wish (see "Selecting further settings -
Audible tones").
18
Switching on
When the appliance is connected to the
electrical supply, the mains connection
symbol will appear in the display af‐
ter a short while.
Touch the On/Off sensor.
The mains connection symbol goes
out and the temperature appears in the
display.
Two bars will flash in the display while
the current temperature is above 0 °C.
The appliance begins to cool.
The temperature display and the alarm
symbol will flash at the same time
until the required temperature is
reached.
When the door is opened, the interior
lighting comes on and the LED lighting
becomes brighter until it reaches its
maximum brightness.
To enable the temperature to get suf‐
ficiently cold inside the appliance, al‐
low the appliance to run for a few
hours before placing food in it.