Miele FN 35402 i Operating And Installation Instructions page 47

The interior lighting is not working.
Problem
The interior lighting is
not working.
Cause and remedy
The appliance has not been switched on.
 Press the On/Off button.
To avoid overheating, the lighting switches itself off
automatically after approx. 15 minutes if the door is
left open. If this is not the case, then there is a fault.
Danger of injury and damage to the appliance.
The LED lighting may only be repaired or replaced
by a Miele authorised service technician. There are
live electrical components under the lighting cover.
Do not remove the cover. If the cover is damaged
or needs to be removed due to damage, exercise
caution.
There are lasers in the lighting (laser beam class
1M) which you should avoid looking at directly. Do
not use optical instruments (magnifying glass or
similar) to look at the lighting either.
 Call the Miele Service Department.
Problem solving guide
47