Manufacturer's Warranty - Tools; Ec Declaration Of Conformity (Original) - Hilti TE 3000-AVR Operating Instructions Manual

For EC countries only
Disposal of electric tools together with household waste is not permissible.
In observance of the European Directive on waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electrical appliances that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.

11 Manufacturer's warranty - tools

Hilti warrants that the tool supplied is free of defects in
material and workmanship. This warranty is valid so long
as the tool is operated and handled correctly, cleaned
and serviced properly and in accordance with the Hilti
Operating Instructions, and the technical system is main-
tained. This means that only original Hilti consumables,
components and spare parts may be used in the tool.
This warranty provides the free-of-charge repair or re-
placement of defective parts only over the entire lifespan
of the tool. Parts requiring repair or replacement as a
result of normal wear and tear are not covered by this
warranty.

12 EC declaration of conformity (original)

Designation:
Type:
Generation:
Year of design:
We declare, on our sole responsibility, that this product complies with the following directives and standards:
2006/42/EC, 2004/108/EC, 2011/65/EU, EN 60745‑1, EN 60745‑2‑6, EN ISO 12100.
Measured sound power level, L
Guaranteed sound power level, L
Conformity assessment procedure
Authorized assessment office (0044)
WA
WAd
Additional claims are excluded, unless stringent na-
tional rules prohibit such exclusion. In particular, Hilti
is not obligated for direct, indirect, incidental or con-
sequential damages, losses or expenses in connec-
tion with, or by reason of, the use of, or inability to
use the tool for any purpose. Implied warranties of
merchantability or fitness for a particular purpose are
specifically excluded.
For repair or replacement, send the tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contemporaneous
comments and oral or written agreements concerning
warranties.
Breaker
TE 3000‑AVR
01
2009
105 dB/1pW
108 dB/1pW
2000/14/EC annex VI
TÜV NORD CERT GmbH
Hannover office
Am TÜV 1
30519 Hannover
Germany
25
en