Table of Contents
Advertisement
Figure 25
1. Battery pack
3. Install a new battery pack in its place.
Disposing of the Old Battery
Pack
Warning
Battery posts, terminals, and related
accessories contain lead and lead compounds,
chemicals known to the State of California to
cause cancer and reproductive harm. Wash
hands after handling.
Important
Do not place used batteries in your
household trash!
Important
The battery pack must be collected,
recycled, or disposed of in an environmentally sound
manner.
Incinerating, landfilling, or mixing sealed lead (acid)
batteries with the municipal solid waste stream is
prohibited by law in most areas.
Return the old battery pack to an approved sealed lead
(acid) battery recycler.
Contact your local waste management officials for other
information regarding the environmentally sound
collection, recycling, and disposal of the battery pack.
Checking the Bumpers
Check the bumpers to ensure that they can detect a hard
and solid obstacle at least six inches (15 centimeters) high
and tree trunks at least one inch (2.5 centimeters) in
diameter.
1. Take the controller out of the drawer.
The following screen displays:
1
2. Press the Go button.
The following screen displays:
m-4991
3. Use the scroll arrows until you see the following
display:
4. Press the Go button.
The following screen displays:
Note: Lt is the left bumper; Rt is the right bumper; and
Rr is the rear bumper. Figure 26 shows the location of
the bumpers on the lawn mower.
1. Left bumper
2. Right bumper
22
Manual
Settings
Sound
set
Bumpers
Lt:– Rt:– Rr:–
1
3
Figure 26
3. Rear bumper
off
2
m–5222
Advertisement
Table of Contents
