Table of Contents
Advertisement
1. Manually drive the lawn mower to your lawn and
position it three feet (one meter) inside the perimeter
wire, along a straight section of the wire, and aimed to
the left (counterclockwise) and away from a corner
(Fig. 22).
1
Figure 22
1. Perimeter wire
2. Press the Go button on the control panel.
The following message displays for a few seconds:
Warming up...
Skip Edge?
The lawn mower then begins to move forward toward the
perimeter wire. After positioning itself on the perimeter
wire, the lawn mower then mows the edge one to two
times.
During this time the following message displays:
Edge
The lawn mower then turns left into the lawn and begins
to mow inside the perimeter wire until the end of its
designated work time.
During this time the following screen displays:
1:59 Roboscan2
2
m–5222
2. 3 ft. (1 m)
16
Note: If you want to change the work time (the default
is set to two hours), refer to Setting the Work Time on
page 18.
Note: To bypass mowing the edge of the lawn and go
straight to mowing the main area inside the wire, simply
press the Go button while the Skip Edge? message is still
in the display window.
Stopping the Lawn Mower
Press the Stop button on the control panel.
Reviewing the Controller Menu
Option Settings
The controller in the lawn mower comes with the
following menu option settings:
Sound On/Off
The lawn mower can operate with or without sound.
However, important audible safety messages cannot be
turned off.
Child Guard On/Off
This option, when turned on, prevents children from
operating the lawn mower. The display shows the
message Keys Locked when the option is activated.
Mowing On/Off
This option allows the lawn mower to move with or
without cutting the grass. You can use the off mode
when you lay a perimeter wire to check its distance
from the lawn edge. If the wire is loose or is raised
above the grass, the blades will not cut it.
Geo Location
You must set your country location; otherwise, the
lawn mower will display Set GEO Location and will
not move in the automatic mode.
Language
This option allows you to set one of the languages in
the system for the display. When you select a
language, the menu then appears in that language.
Work Time
You can set the amount of time you want the lawn
mower to mow your lawn nearly up to the duration of
the charge life of the battery pack.
Note: When you set the work time to MAX (the
duration of the charge life of the battery pack), the
lawn mower will mow until it reaches a set reserve
Advertisement
Table of Contents
