Table of Contents
Advertisement
Activate Motors
Confirm
Note: Call 1–877–iMow (4469) if you can't find the
line or you have moved over 100 miles from where
you first calibrated the lawn mower.
3. Calibrate the lawn mower. Refer to Calibrating the
Lawn Mower on page 13.
Wire Sensors
This feature is to help a certified technician to diagnose
and service problems with the wire sensors.
Direction Keeper
This feature is to help a certified technician to diagnose
and service problems with the direction keeper.
Front Wheel Sensor
Refer to Checking the Lift-off Switch on page 23.
Bumpers
Refer to Checking the Bumpers on page 22.
Software Version
This feature displays the software version of the controller
for the lawn mower.
1. From the Diagnostics menu, use the scroll arrows until
you see the following display:
S.W. Version:
V.3.19T
2. Press the Cancel button to exit the software version
menu.
Total Time
The total time feature shows the accumulated time that the
lawn mower has operated in the automatic mode.
1. From the Diagnostics menu, use the scroll arrows until
you see the following display:
Total time:
00 hr 00 m
2. Press the Cancel button to exit the total time.
Buttons
This feature is to help a certified technician to test the
response of the buttons on the controller.
Miscellaneous
This feature displays the voltage of the battery pack and
the temperature inside the lawn mower.
1. From the Diagnostics menu, use the scroll arrows until
you see the following display:
Miscellaneous
ok
2. Press the Go button.
The following screen displays:
Batt V: 25.1
Temp:+36c +96F
Note: This display shows the battery pack voltage and
the temperature (in Celsius and Fahrenheit) of the
inside of the lawn mower.
3. Press the Cancel button to exit the miscellaneous
menu.
Exiting the Setting Mode
Press the Cancel button to return to a higher menu level.
Continue to press the Cancel button, going up a menu
level each time until you reach the Manual Settings
message in the display.
Lawn Mowing Tips
For the best cutting results and lawn appearance, follow
these instructions:
To keep the lawn well groomed, operate the lawn
mower a few times a week. A larger mowing plot may
require three consecutive cuttings with a follow-up
every other day to achieve a uniform length of cut.
Mow only dry grass and leaves. Wet grass and leaves
tend to clump on the yard and may cause the lawn
mower to plug and stall.
Grass grows at different rates at different times of the
year. In the heat of summer, it is generally best to cut
the grass at a higher cutting-height setting. Cut only
about a third of the grass blade at one time.
19
Advertisement
Table of Contents
