Table of Contents
Advertisement
4. To select the desired option, press the Go button.
5. To go up a menu level, press the Cancel button.
Setting the Geo Location
To set the Geo location, do the following steps:
1. From the Settings menu, use the scroll arrows until you
see the following display:
GEO Location
set
2. Press the Go button.
3. Use the scroll arrows to view the desired location in
the menu.
4. To select the desired location, press the Go button.
5. To go up a menu level, press the Cancel button.
Setting the Language
The default language is English. To set the language, do
the following steps:
1. From the Settings menu, use the scroll arrows until you
see the following display:
Language
set
2. Press the Go button.
3. Use the scroll arrows to view the desired language in
the menu.
4. To select the desired language, press the Go button.
5. To go up a menu level, press the Cancel button.
Setting the Work Time
To set the work time, do the following steps:
1. From the Settings menu, use the scroll arrows until you
see the following display:
Work Time
set
2. Press the Go button.
The following screen displays:
Zone A
set
2:40
18
3. Use the scroll arrows to view the desired zone.
4. To select the desired zone, press the Go button.
5. Use the scroll arrows to find the amount of work time
you desire.
Zone A
ok
Note: You can set the time in 20-minute increments up to
two hours and 40 minutes; the final display in the menu
shows MAX, the battery time available until it needs
recharging.
6. To select the new work time, press the Go button.
7. Press the Cancel button to exit the set work time
display.
Note: You can set the work time on your lawn mower for
up to four different mowing plots (refer to Plots A, B, C,
and D in Fig. 4).
Note: The lawn mower can mow approximately
1000 square feet (100 square meters)—roughly about the
size of a tennis court—per hour.
Note: If you do not set the work time, the lawn mower
will use the work time default setting of two hours. The
perimeter switch turns off automatically after
approximately five hours.
Service
This menu item is for a certified technician only.
Diagnostics
1. From the Settings menu, use the scroll arrows until you
see the following display:
Diagnostics
set
DK (Direction Keeper) Calibration
This feature allows you to calibrate the direction keeper
during the initial setup of the lawn mower.
1. From the Diagnostics menu, use the scroll arrows until
you see the following display:
DK Calibration
2. Press the Go button.
The following screen displays:
2:00
Advertisement
Table of Contents
