Table of Contents
Advertisement
mowing plot, temporarily mounting it on a wall, a
fence, a post, or a perimeter mounting stake mounted
vertically at least five feet (1.5 meters) from the from
the perimeter wire plot edge.
Loose Parts
DESCRIPTION
Perimeter switch
1.5V C-cell batteries
Perimeter mounting stake
Ruler
Pegs
Perimeter wire—500 ft. (152 m)
Wire connectors
Switch connectors
Fuse
Battery Charger
Instructional Video
*Additional pegs and perimeter wire are available. For assistance, call 1-877-636-iMow (1-877-636-4669).
Installing the Perimeter Switch
1. Open the perimeter switch case by squeezing the front
part of the tabs to the case (Fig. 6).
Figure 6
1. Perimeter switch case
2. Tab (2)
2. Insert three 1.5V C-cell batteries (Fig. 6).
3. Close the perimeter switch case.
QTY.
100*
1
2
3
3.
1.5V C-cell battery (3)
1
3
Installing the Perimeter Switch
1
1
Laying the Perimeter Wire
1*
5
Connecting the Perimeter Wire to the
4
Perimeter Switch
1
Installing the Fuse
1
Charging the Battery Pack
1
Learning how to use the robotic lawn mower
4. Mount the perimeter switch in a location out of the
reach of children by using one of the following
methods:
Mount the perimeter switch permanently with three
screws (Fig. 7).
1. Perimeter switch case
Mount the switch onto a perimeter mounting stake
that you can move from plot to plot (Fig. 8).
9
USE
1
m–5224
Figure 7
2. Screw (3)
2
Advertisement
Table of Contents
