Adjusting The Projection - Zte Spro 2 User Manual

There are several ways that you can turn on or off the projector.

When your Spro 2‟s screen is turned on, swipe up or down
using THREE fingers on the screen to turn on or off the
projector.

Drag the status bar down from the top of the screen and
touch Projector below Control Switch.

From the HOME tab of the home screen, touch the round
button on the Projector widget.

From the SETTINGS tab of the home screen, touch
Projector > Control and then touch the switch next to
Projector in the Projector settings screen.

Press and hold the Power key and touch Turn on projector
or Turn off projector.

If the projector floating button is enabled, touch
the options menu and touch
(Projector on).
NOTE:
For best results, project onto a non-reflective white flat display
surface at a 90° angle to Spro 2‟s touch screen. The projection
distance of Spro 2 is about 2.3 to 12 feet.

Adjusting the Projection

When the projector is on, you can adjust projection focus,
keystone distortion, projection brightness and projection color.
To adjust projection focus:
(Projector off) or
19
to open