Adjusting The Projection - Zte Spro2 Quick Start Manual

There are several ways that you can turn on or off the projector.
When your Spro2's screen is turned on, swipe up or down using

THREE fingers on the screen to turn on or off the projector.
Drag the status bar down from the top of the screen and touch

Projector below Control Switch.
From the HOME tab of the home screen, touch the round button

on the Projector widget.
From the SETTINGS tab of the home screen, touch Projector >

Control and then touch the switch next to Projector in the
Projector settings screen.
NOTE:
For best results, project onto a non-reflective white flat display surface
at a 90° angle to Spro2's touch screen. The projection distance of
Spro2 is about 3 to 12 feet.

Adjusting the Projection

When the projector is on, you can adjust projection focus, keystone
distortion and projection brightness.
34