Zte Spro 2 User Manual page 58

2. Slide the Wi-Fi switch to the ON position.
3. Touch a WPS-capable access point. It has the icon
to its name.
4. In the window that opens, check Show advanced options.
5. Touch the field below WPS PIN from access point and
select Enable.
6. Enter the PIN of the access point and touch Connect. You
can find the PIN on the configuration page of the access
point.
NOTE:
For detailed information about the WPS feature of the access
point, please refer to its user documents.
Adjust Advanced Wi-Fi Settings
1. Touch the Home key > SETTINGS tab > System >
Network > Wi-Fi.
2. Touch the Menu key > Advanced to adjust the following
settings.
 Network notification: Get notifications in the status bar
when Wi-Fi is on and an open network is available.

Keep Wi-Fi on during sleep: Set whether to keep Wi-Fi
on in sleep mode.
Scanning always available: Allow Google‟s location

service and other apps to scan for networks, even when
Wi-Fi is turned off.
58
next