Zte Spro 2 User Manual page 49

To use Internet connection shared by Spro 2, search for

hotspots and connect to the one with the name starting
with "DIRECT-" using your device‟s Wi-Fi feature. The
password is the same as the one you set for Mobile
Hotspot.
To project content from your device via Miracast, connect

to Spro 2 using your device‟s Wi-Fi Display or Cast
Screen feature.
NOTES:

If your device has been connected to the hotspot, it will be
disconnected when you turn Miracast on. You need to search
for hotspots and reconnect to the one with the name starting
with "DIRECT-".

Your device must support Wi-Fi in the 5 GHz band to use the
hotspot or Miracast while Spro 2‟s Mobile Hotspot and
Miracast are both on.

While the Miracast link is not active, at most 10 devices can
connect to the hotspot; while the Miracast link is active, at
most 5 devices can connect to the hotspot (or 4 devices if the
Miracast link is used by another device).

With Miracast active, your hotspot cannot support some
advanced features such as user management, IP filtering,
and WPS.
49