Projecting Contents On A Usb Device - Zte Spro 2 User Manual


Set the screen refresh rate of your laptop/PC to 60 Hz or
below. For a Windows XP laptop/PC, right-click on the
desktop and select Properties > Settings > Advanced >
Monitor > Screen refresh rate; for a Windows 7 laptop/PC,
right-click on the desktop and select Screen resolution >
Advanced settings > Monitor > Screen refresh rate.

Projecting Contents on a USB Device

You can project a file stored on the USB device such as a USB
flash drive or a portable hard drive.
1. Slide the status bar down to open the notification panel and
ensure that Connect to USB stick
2. Connect your USB device to Spro 2 via the USB jack.
3. Touch the Home key > APPS tab > File Manager.
4. Touch USB DEVICE to open the file you want to project.
5. Turn on the projector. See Turning On/Off the Projector.
is highlighted.
46