Adjusting The Projection - Zte Spro2 User Manual

Use one of these methods to turn the projector on or off:

When the Spro2‟s screen is turned on, swipe up or down
using THREE fingers on the screen to turn on or off the
projector.

Drag the status bar down from the top of the screen and
touch Projector on the top of the notification panel.

From the HOME tab of the home screen, touch the round
button on the Projector widget.

From the SETTINGS tab of the home screen, touch
Projector > Control and then touch the switch next to
Projector in the Projector settings screen.
NOTE: For best results, project onto a non-reflective white
flat display surface at a 90° angle to Spro2‟s touch screen.
The projection distance of Spro2 is about 3 to 12 feet.

Adjusting the Projection

When the projector is on, you can adjust projection focus,
keystone distortion, projection brightness, and projection color.
To adjust projection focus:
1. Touch Home > SETTINGS > Projector > Image.
2. In the Focus section, turn on automatic focus or touch "+" and
"-" to make manual adjustment.
NOTE: P
ress the Power button twice quickly to adjust projection
focus automatically.
18