Table of Contents
Advertisement
STEP 4
Connect the Extension Wire (13) with the sensor
wire (11), then fix the handlebar post (17) to the
main frame (1) with the Inner hex bolts (14) and
arc washers (6).
STEP 5
I: Feed the pulse wire (28) out of the handlebar
post (17) through the top of the computer bracket.
II: Attach the handlebar (27) to the handlebar post
(17) with the Inner hex bolt (31), spring washer
(30) and flat washer (20), finally, cover the Handle-
bar Chuck Cover (32) as shown.
STEP 6
Connect all the wires (13 & 28) to the wires come
from the computer (24), and then install the com-
puter (24) onto the computer bracket on the top of
the handlebar post (17) with the cross pan head
screw (21) and flat washer (22) as shown.
Now your machine is ready for use.
7
Advertisement
Table of Contents
