Table of Contents
Advertisement
STEP 1
Attach the front stabilizer (2) and rear stabilizer (3)
to the main frame (1) with the carriage bolts (5), arc
washers (6) and acorn nuts (7) as shown.
Note: The Leveler end caps of the rear stabilizer
can be ADJUSTED to keep the equipment stable.
STEP 2
Attach the pedals (9L/R) to the Crank (8L/R) re-
spectively, viewed from the rider's exercising posi-
tion.
Always make sure the pedals are securely tight-
ened before any exercise.
Note: Both pedals are labeled L FOR LEFT and R
FOR RIGHT.
To tighten the left pedal COUNTERCLOCKWISE
and the right pedal CLOCKWISE.
STEP 3
Attach the saddle (19) to the saddle post (12) with
the nylon nut (25) and flat washer (20) as shown.
And then insert the saddle post (12) to the Exten-
sion plastic (16).
Then, insert the saddle post (12) into the main
frame (1) with the knob (29) at a proper height as
shown.
6
Advertisement
Table of Contents
