Installing Or Replacing A Flex Adapter - Lenovo ThinkStation P500 User Manual

• If you are installing a memory module, open the retaining clips of the memory slot into which you
want to install the memory module.
Figure 110. Opening the retaining clips
8. Position the new memory module over the memory slot. Ensure that the notch
module aligns correctly with the slot key
down into the slot until the retaining clips close.
Figure 111. Installing a memory module
9. Reinstall the optical drive bracket if you have removed it. See "Removing and reinstalling the optical
drive bracket" on page 88.
10. Reinstall the direct cooling air baffle. See "Removing and reinstalling the direct cooling air baffle"
on page 76.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 149.

Installing or replacing a flex adapter

Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page v.
Depending on your computer model, the type of flex adapter on your computer varies.
2 on the system board. Push the memory module straight
Chapter 9
1 on the memory
.
Installing or replacing hardware
137