Lenovo ThinkStation P500 User Manual page 137

• If you are replacing an old PCI card, grasp the old card that is currently installed and gently pull it
out of the slot.
Notes:
– If the PCI card is connected to another device, disconnect the cable from the card first.
– The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small
amount until it is removed from the card slot.
– If the card is held in place by a retaining latch, press the card retaining latch
disengage the latch. Grasp the card and gently pull it out of the slot.
Figure 95. Removing a PCI card
7. Remove the new PCI card from its static-protective package.
8. Install the new card into the appropriate slot on the system board. See "Locating parts on the system
board" on page 6.
Note: If the new PCI card needs to be connected to another device, connect the cable of the device
to the new PCI card.
9. Pivot the PCI card latch to the right and push it back in until it snaps into position.
1
.
Chapter 9 Installing or replacing hardware
as shown to
125