Lenovo ThinkStation P500 User Manual page 95

5. Slide the new slim optical drive with the plastic clip into the flex module until the slim optical drive
snaps into position.
Figure 23. Installing the slim optical drive in the flex module
6. Position the flex module cover on the flex module so that the rail guides on the bottom of the flex module
cover engage the rails on the flex module. Then, push the cover to the front of the flex module until
it snaps into position.
Figure 24. Reinstalling the flex module cover
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 149.
Installing or replacing a card reader in the flex module
To install or replace a card reader in the flex module, do the following:
1. Remove the flex module from the front of the computer. See "Installing or replacing a device in the
optical drive bay" on page 78.
.
Chapter 9 Installing or replacing hardware
83