Lenovo ThinkStation P500 User Manual page 125

Figure 75. Installing the type
12. Connect the signal cable and the power cable to the converter, and then close the handles on both
sides of the storage drive bracket.
To install or replace a 2.5-inch storage drive with a converter in a type
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See "Removing the computer cover" on page 75.
3. Locate the storage drive bay in which you want to install or replace a storage drive. See "Locating
internal drives" on page 10.
4. Press the pit on the bracket cover, and then grasp the tilted cover to pull the bracket out of the storage
drive bay.
Figure 76. Removing the type
1
storage drive bracket
2
storage drive bracket
2 bracket, do the following:
.
Chapter 9 Installing or replacing hardware
113